FM30 Fusion Fiber - Trail
THE FUTURE IN WHEEL TECHNOLOGY IS HERE!
Better Performance – Zero Waste. Zero Carbon Dust. Zero Emissions. 100% Recyclable. Made in the USA.
The Atomik FM30 Fusion Fiber Trail/AM is all new from Atomik. Fusion Fiber is made with long-chain polymers instead of the brittle and toxic epoxies and resins used in typical carbon fiber. This makes it possible to absorb impacts through microscopic flexing in the fibers and to radially dissipate shock throughout the rim. As a result, Atomik wheels built with FusionFiber offer a smoother ride and much higher impact resistance than traditional carbon rims.
Rims: $650 each – Complete wheel sets starting at: $1,798
| Tubeless Ready | Yes |
| Depth | 27.5: 27.6mm 29: 23.5mm |
| Width – O.D. | 27.5: 35.7mm 29: 35.1mm |
| Width – I.D. | 29mm |
| Weight | 27.5: 450g +/- 15g 29: 475g +/- 15g |
| Spoke Drilling | 32 or 28 |
| Spoke Tension | Rec 120-130 kgf |
| ERD | 27.5: 547 29: 592 |
| Price | $650 U.S. msrp |
99.9% MADE IN AMERICA,
100% RECYCLABLE,
100% LIFETIME WARRANTY
The Atomik FM30 with Fusion Fiber™ technology results in a wheelset with superior ride qualities when compared to today’s modern carbon fiber options. The FM30 allows more vertical compliance without sacrificing lateral stability – surpassing the inherent qualities of carbon fiber with its stiff and harsh qualities. All of this results in a smoother ride with much improved trail feedback and precise control.
Normally improving strength requires adding more material, which increases weight and decreases performance. FusionFiber are as light as, or even lighter than, typical high performance carbon fiber rims. FusionFiber also provides a 50% or greater increase in damping while maintaining lateral stability. This is the best of all worlds. Stronger and more durable, without additional weight. A smoother ride without sacrificing trail feedback or control.
Every wheel set is hand built in-house using, the new FM30 is a 99.9% Made in the USA wheel set that boasts even spoke tensions and rim runout that simply cannot be matched by machine built wheels.
Bead Lock
All Atomik Carbon rims utilize an angled bead lock to keep the tire bead positioned on the shelf when air is released from the tire and also adds a level of safety if a tire is leaking. This features allows you to refresh sealant without having the tire bead fall into the center of the rim, resulting in a tire that is more difficult to inflate and re-seat.
Hookless Design
The hookless wall thickness is a whopping 3.5mm and designed to help displace impact. The wall thickness is much greater than traditional hookless designs (as shown in the illustration above) and the additional strength provided by the thicker sidewall yields a rim that is light and extremely strong.